Shanghai Fengxian Equipment Vessel Factory

Ingenious Intelligent Manufacturing, Create a Centennial Brand

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsStainless Steel Air Receiver Tank

Medium Pressurized Stainless Steel Air Receiver Tank Vertical Pressure Vessel Design

Medium Pressurized Stainless Steel Air Receiver Tank Vertical Pressure Vessel Design

Medium Pressurized Stainless Steel Air Receiver Tank Vertical Pressure Vessel Design

Product Details:

Place of Origin: Shanghai China
Brand Name: Shenjiang
Certification: ISO BV SGS CE ASME
Model Number: SJ-2.0-1.0

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: Negotiation
Packaging Details: plywood packing for each tank
Delivery Time: 15 days after received payment
Payment Terms: D/A, D/P, L/C, T/T, Western Union, MoneyGram
Supply Ability: 2000 sets one month
Contact Now
Detailed Product Description
Material: Stainless Steel 304 / 316 Volume: 0.3 M3
Pressure: 0.6 Mpa Operating Temperature: 100 Degree
Orientation: Vertical Height: 1600mm
Tank Diameter: 550mm

1. Company Profile
 
Shanghai Fengxian Equipment Vessel Factory was founded in 1982, and specializes in designing and manufacturing all kinds of pressure vessels. We have a high profile in the industry. And in 1998, we registered the brand of “Shen Jiang”. Our pressure vessels are widely used in petroleum, chemical, electronic, automotive, power generation, mining, pharmaceutical and other industries. Look forward to the cooperation with you in the increasingly powerful of our company.

 

2. compressed air receiver tank Introduction:

 

1. Types: storage tank, air storage tank, liquid storage tank, vertical storage tank, horizontal storage tank, spherical tank, carbon steel storage tank,low-alloy steel storage tank, stainless steel storage tank and so on.

2. Materials: carbon steel, low-alloy steel, stainless steel and non-ferrous metals:

3. Pressure: low-pressure, medium-pressure and high-pressure.

4. Temperature: low-temperature , medium-temperature and high-temperature.

5. Medium: not only non-flammable,non-toxic and non-corrosive medium ,Water, air, oxygen, argon, helium, nitrogen

6. Processing capacity:maximum diameter:6m; maximum length:60m;maximum weight:600tons

7. Applicable Industries: petrochemical, coal chemical, precision chemical, nuclear power, metallurgical, pharmaceutical, machinery, food, pesticide, rubber, aerospace, and so on.


3. The important of compressed air receiver tank in air compressor system ?


Air buffer storage tank is an integral and important part of any compressed air system. Typically a receiver tank is sized at 6-10 times the flow rate of the system. So, if a compressor has a rating of 25 cfm at 100 psi, the receiver tank should be 150 cubic feet, minimum. In a compressed air system, a receiver tank provides the following benefits:

  • The receiver tank acts as a reservoir of compressed air for peak demands.
  • The receiver tank will help remove water from the system by allowing the air a chance to cool.
  • The receiver tank minimizes pulsation in the system caused by a reciprocating compressor or a cyclic process downstream.

Much like a water reservoir provides water during times of drought and stores water during the wet times, an air receiver tank compensates for peak demand and helps balance the supply of the compressor with the demand of the system.
Receiver tanks are required by law to have a pressure relief valve and a pressure gauge. The relief valve should be set to 10% higher than the working pressure of the system.
It is also important to install either a manual or automatic drain on the receiver tank to remove water from the system. 

 

4. The basic requirements for the selection of gas tanks

 

1. the size of the volume of the gas tank should be air compressor displacement (gas production capacity) between 10% to 20% to choose. 15% moderate. When the gas is large or large fluctuations in the use of gas conditions. the volume of the tank should be appropriate to 20%; for less gas consumption. and little fluctuating conditions. can be less than 15% ; But not less than 10%.
2. in supporting the installation of compressed air system. the gas tank is generally installed in the air compressor after the cooler. This will prevent the accumulation of oil and liquid water in the tank. reduce the safety hazard and improve the work of other equipment of the gas source; so that the lower the temperature of the air entering the storage tank can also reduce the volume of the body.
3. in the matching installation equipment. the vast majority of occasions. the installation of gas tanks are installed in the freeze dryer before the use of gas tank with the cooling water and pressure regulator. so that the load can be reduced dryer. air pressure is relatively stable . Which is very beneficial to the operation and use of the dryer.
4. in supporting the installation of equipment. the main channel filter are installed in the gas tank after. This will allow the tank to cool down and cool down and remove the compressed air more water. oil and gas. dust and other dirt. and then enter the air filter. so that its operation and service life is very favorable.


5. Our Advantages
 

1. Design   Free design according customer's requirement
2. Finished   With in house Blast Cleaning and Paint Spray facilities, Internal and External finishes to specific BS/EN/ISO standards are common practice. Galvanization, Epoxy Resin, DWI approved paint, and other finishes at your request.
3. Testing   Materials, Processes, and Final Products are tested in a variety of ways, including: X-Ray, Tensile Tests, Hardness Tests, Dye Penetration, Hydrostatic, Radiographic etc.
4. Document   Full Certification can be supplied: – Certificates of Conformity, Hydraulic tests, weld procedures, weld tests, material certificates, pressure gauges, relief valves etc. upon your request.


6. Production Process


1. Lofting, marking-off & cutting.

2. Manufacturing & welding

a. Make holes

b. Crimping plate

c. Spheronization

d. Welding

e. Install

f. Circumferential welding

3. Surface treatment

a.For Carbon Steel

(1) Sand blasting (2) Primer (for 2 times) (3) Finishing coat

b. For Stainless steel

(1) Sand blasting OR (2) Polishing

 

Medium Pressurized Stainless Steel Air Receiver Tank Vertical Pressure Vessel Design

 

 

Contact Details
Shanghai Fengxian Equipment Vessel Factory

Contact Person: Lisa Lee

Send your inquiry directly to us (0 / 3000)

Other Products